Rapid air circulation drying.
A high-quality air circulation fan combined with heated air ensures material-friendly and energy-saving kit drying.
- Recirculation drying
- Combination of a powerful fan and a heating system
- Two drying versions: Ambient air drying or heated air drying
- Ambient temperature of 15 °C or above
- Moisture is released via the ambient air
- Plug & Play product
- Optionally with Sterex hygiene function, based on innovative plasma technology
- Quick, gentle kit drying
Energy-efficient condensation drying.
As well as recirculation drying, DRYTECH drying solutions also offer highly energy efficient and economical condensation
The lockers use up to 60% less energy than comparable products! This is achieved by reducing the number of
heating rods which only switch on briefly at the start of the drying cycle to reach the necessary operating temperature.
They are then only switched on again when needed – if the locker falls below the required operating temperature.
During condensation drying, moisture is condensed on side-mounted copper tubes that form part of a closed coolant circuit.
The condensate is either collected in a water tank on door of the device or fed directly back into the wastewater
system, provided that a connection is available.
In addition to the energy savings, other benefits include an improved indoor climate and use at a lower ambient temperature of
7 °C and above. As the moisture is drawn out of the clothing in the locker and discharged, the ambient air is not saturated
with moisture, as is the case with simple dryers. This prevents mould and unpleasant musty smells in the room and moisture from any neighbouring shower rooms is reduced.